Industry We Serve
Heating Solutions for Cosmetics Industry
Gentle, precise heating for melting, mixing, moulding, filling and sealing cosmetics
What we heat
- Melting and mixing vessels50–90 °C
- Raw-material drum heating
- Lipstick and wax moulding
- Hot filling
- Tube and pouch sealing120–250 °C
Heat in Cosmetics Industry
Cosmetics manufacturing heats waxes, oils and emulsions for creams, lotions, lipsticks and balms, then fills and seals them into tubes, jars and bottles. MaxVolt supplies immersion, circulation, drum, cartridge, cast-in and hose heaters for cosmetics plants and filling-machine builders.
Cosmetic formulations are sensitive: overheat an emulsion or a fragrance and the batch is lost. Waxes and butters have to be melted gently, held at temperature through mixing and filling, and moulded or sealed precisely.
MaxVolt designs heaters for these steps with low surface temperatures, stainless construction and accurate control, from raw-material drums to the filling line.
Problems we solve for this industry
Heat-sensitive formulations
Hot heater surfaces can scorch waxes, oils and active ingredients.
Our approach: Low watt-density and indirect (jacket) heating keep surface temperatures gentle.
Batch consistency
Temperature variations between batches change texture and stability.
Our approach: Accurate sensors and correctly sized heaters give repeatable batches.
Hygiene
Heaters must not contaminate products or be hard to clean.
Our approach: Stainless-steel construction and cleanable designs.
Product setting in filling lines
Waxy products cool and set in hoses and nozzles between fills.
Our approach: Heated hoses and nozzle heaters keep product flowing.
Applications & recommended heaters
Melting and mixing vessels
50–90 °CHeating waxes, oils and emulsions for creams, lotions and balms.
Raw-material drum heating
Melting waxes, butters and oils in drums before use.
Lipstick and wax moulding
Heating moulds and melt pots for lipsticks, balms and wax products.
Hot filling
Keeping product fluid in hoses, hoppers and nozzles on filling machines.
Tube and pouch sealing
120–250 °CSealing jaws on tube fillers and sachet machines.
Heaters for Cosmetics Industry
Process Heaters
Flanged Immersion Heater
View details
Process Heaters
Circulation Heater
View details
Component Heaters
Silicone Rubber Heater
View details
Component Heaters
Flameproof Drum Heater
View details
Component Heaters
Cartridge Heater
View details
Process Heaters
Casted Heater
View details
Component Heaters
Hose Pipe Heater
View details
Component Heaters
Strip & Finned Strip Heater
View detailsWhat to share for an accurate quote
- Product
- Formulation type and maximum safe temperature.
- Vessel
- Tank or vessel size, jacketed or not, and mounting.
- Material
- Stainless grade for product-contact parts.
- Machine
- Mould, hose or sealing-jaw drawing and rating.
- Control
- Sensor type and controller.
Don't have every detail? Send what you know — a photo of the old heater or a rough sketch is enough to start. Send your requirement →
From requirement to installed heater
- 01
Consultation
Understanding your application, environment and thermal requirements.
- 02
Custom Engineering
Precision-calculated specifications tailored to your process.
- 03
Manufacturing
Built in-house under strict quality-control procedures.
- 04
Testing & Validation
Every unit tested under real-world operating conditions.
- 05
Delivery & Support
Installation guidance and ongoing technical support.
Cosmetics Industry heating — common questions
Use low surface temperatures: a low watt-density immersion heater, a jacketed vessel heated by a circulation heater, or a drum heater with thermostatic control.