Industry We Serve
Heating Solutions for FMCG (Fast Moving Consumer Goods)
Reliable heaters for high-speed filling, sealing, shrink-wrap, hot-melt and process lines
What we heat
- Form-fill-seal and wrapping machines120–250 °C
- Shrink tunnels and sleeve labelling
- Hot-melt gluing and coding150–200 °C
- Process and mixing tanks40–95 °C
- Bottle and cap moulding
Heat in FMCG (Fast Moving Consumer Goods)
FMCG production lines run fast and rarely stop: filling, sealing, shrink-wrapping, labelling, hot-melt gluing and the process tanks that feed them all depend on reliable heaters. MaxVolt supplies cartridge, strip, infrared, hose, band and immersion heaters for FMCG plants and the machine builders that serve them.
On an FMCG line, one failed sealing heater can stop thousands of packs an hour. Heaters have to hold their temperature through constant cycling, be quick to replace and be available when needed.
MaxVolt supplies heaters for every heated point on these lines — from sealing jaws and shrink tunnels to hot-melt hoses and the tanks that prepare soaps, detergents, oils and other products.
Problems we solve for this industry
Line stoppages
A heater failure on a high-speed line costs a lot of output.
Our approach: Heaters built for continuous cycling, in standard sizes that can be kept as spares.
Inconsistent seals
Temperature drift on sealing jaws causes leaking or burnt packs.
Our approach: Cartridge and strip heaters matched to the jaw, with sensors close to the sealing face.
Frequent changeovers
Many SKUs mean frequent changes of film, size and temperature.
Our approach: Responsive heaters that reach new set-points quickly.
Hot-melt hose failures
Hot-melt hoses that lose heat cause glue to set in the line.
Our approach: Heated hoses with built-in sensors to keep adhesive at application temperature.
Applications & recommended heaters
Form-fill-seal and wrapping machines
120–250 °CVertical and horizontal sealing jaws on pouch and flow-wrap machines.
Shrink tunnels and sleeve labelling
Shrinking film and sleeves around bottles, cans and multipacks.
Hot-melt gluing and coding
150–200 °CHeated hoses and guns for carton sealing and labelling.
Process and mixing tanks
40–95 °CHeating oils, fats, soaps and liquid products during preparation.
Bottle and cap moulding
Injection and blow moulding of containers and closures.
Heaters for FMCG (Fast Moving Consumer Goods)
Component Heaters
Cartridge Heater
View details
Component Heaters
Strip & Finned Strip Heater
View details
Component Heaters
Nano IR Heater
View details
Component Heaters
Hose Pipe Heater
View details
Process Heaters
Flanged Immersion Heater
View details
Process Heaters
Circulation Heater
View details
Component Heaters
Mica Band Heater
View details
Component Heaters
Coil & Hot Runner Heater
View detailsWhat to share for an accurate quote
- Machine
- Machine make or drawing of the jaw, plate or tank.
- Temperature
- Set-point and how fast it must respond.
- Rating
- Wattage, voltage and lead or terminal type.
- Spares
- How many machines use the same heater.
- Quantity
- Spares stock or OEM production volumes.
Don't have every detail? Send what you know — a photo of the old heater or a rough sketch is enough to start. Send your requirement →
From requirement to installed heater
- 01
Consultation
Understanding your application, environment and thermal requirements.
- 02
Custom Engineering
Precision-calculated specifications tailored to your process.
- 03
Manufacturing
Built in-house under strict quality-control procedures.
- 04
Testing & Validation
Every unit tested under real-world operating conditions.
- 05
Delivery & Support
Installation guidance and ongoing technical support.
FMCG (Fast Moving Consumer Goods) heating — common questions
Yes. Send the old heater or its dimensions and rating, and a matching replacement can be made.